LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (55 Lids, Flaps - Coupe -- 971 - PANAMERA (971)) >> 5510 Front Lid Release >> WM, 551019 Removing And Installing Front Lid Release >> Installing Front Lid Release

Installing Front Lid Release

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order. Pay particular attention to the following:

Tighten screw securing actuating lever to A-pillar > Tightening torque 2 Nm (1.5 ftlb.) 

scientia non olet · About LEMON Manuals