LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (43 Leveling System, Air Suspension, Damper Control 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 436637 Disassembling And Assembling Rear Spring Damper >> Disassembling And Assembling Spring Damper >> Disassembling Spring Damper

Disassembling Spring Damper

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the -1-  shock absorber mounting.
    1. 1.1 Unscrew -2-  nut using >T10001 - the shock absorber set  while at the same time holding back the multipletooth screw of the piston rod -3-  .
    2. 1.2 Remove shock absorber mount -1-  from piston rod -3-  .
    G15860952Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Shock absorber mounting

  2. Pull supporting washer -1-  from piston rod -2-  .
    G15860953Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Support washer

  3. Remove stop buffer -1-  and protective sleeve -2-  .
    1. 3.1 Pull stop buffer -1-  with protective sleeve -2-  from the piston rod.
    2. 3.2 Pull stop buffer -1-  from protective sleeve -2-  .
      G15860954Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Stop buffer and protective sleeve

scientia non olet · About LEMON Manuals