LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (43 Leveling System, Air Suspension, Damper Control 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 432419 Removing And Installing Air Pipe (Suction Hose) >> Removing Air Pipe (Suction Hose)

Removing Air Pipe (Suction Hose)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove suction hose -1-  at the compressor -2-  .
    G15860862Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for suction hose on compressor

    1. 1.1 Loosen spring band clamp -3-  and pull off suction hose -1-  .
    2. 1.2 Loosen bracket -4-  .
  2. For vehicles with old line routing:  Loosen suction hose from the carbon canister.
    1. 2.1 Unscrew nuts -2-  from the carbon canister -1-  .
      G15860863Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Carbon canister

    2. 2.2 Carefully lower the carbon canister and loosen brackets -2-  from the suction hose -1-  .
      G15860864Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Suction hose mounting on carbon canister

  3. For vehicles with old line routing:  Remove suction hose -1-  .
    G15860865Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Suction hose mounting (old line routing)

    1. 3.1 Loosen suction hose at the brackets -2-  .
    2. 3.2 Pull air cleaner -3-  off the bodyshell bolt.
  4. For vehicles with new line routing:  Remove suction hose -1-  .
    G15860866Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Suction hose mounting (new line routing)

    1. 4.1 Loosen suction hose at the brackets -2 to 4-  .
    2. 4.2 Pull air cleaner -5-  off the bodyshell bolt.