LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (43 Leveling System, Air Suspension, Damper Control 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 432419 Removing And Installing Air Pipe (Suction Hose) >> Installing Air Pipe (Suction Hose)

Installing Air Pipe (Suction Hose)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit suction line -1-  on the compressor -2-  .
    G15860867Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for suction line on compressor

    1. 1.1 Connect suction line -1-  to connection piece and secure with a spring band clamp -3-  .
    2. 1.2 Secure bracket -4-  .
  2. Fit suction hose -1-  .
    G15860868Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Suction hose mounting (new line routing)

    1. 2.1 If necessary, attach new adhesive base for bracket -4-  on the carbon canister as shown. Bonding surfaces must be clean and free of dust and grease.

      Information 

      Brackets must be within the colored markings applied on the suction hose!

    2. 2.2 Secure suction hose in brackets -2 to 4-  (bracket -3-  is designed as a triple holder for the new line routing).
    3. 2.3 Fit air cleaner -5-  on bodyshell bolt (clip must engage with an audible click).
scientia non olet · About LEMON Manuals