Removing Valve Unit

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Remove heat protection panel -1- at the bottom from the bolts and press it aside slightly.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat protection panel mounting
Release and disconnect electric plug connection -2- on the valve unit -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection on the valve unit

Information

The cutting ring -1- and Voss threaded joint -2- must remain on the air line -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air line
Remove air lines on valve unit -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for air lines on valve unit
1. 3.1 Unscrew Voss threaded joints -2 and 3- and pull off air lines.
Remove valve unit -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for valve unit
1. 4.1 Unscrew fastening screws -2- .