Replacing Compressor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
If the compressor has to be replaced, the control unit for the compressor must also be replaced.
- Remove holder -1-
.
Mounting for holder
- 1.1 Unscrew fastening screws -2- using >9890 - socket wrench E12 .
- Slide control unit for compressor -1-
off the holder -arrow A-
.
Mounting for control unit for compressor
- Install new control unit for compressor in reverse order.
Mounting for holder: >Tightening torque 10 Nm (7 ftlb.)