LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (82 Auxiliary Heating - Wagon -- 971 - PANAMERA (971)) >> WM, 827219 Removing And Installing Circulating Pump (Hybrid) >> Removing Circulating Pump

Removing Circulating Pump

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Have suitable stoppers ready for closing off the line connections.
  2. Loosen evaporator holder -3-  .
    1. 2.1 Unscrew screws -2-  .
    2. 2.2 Screw off nut -1-  .
    3. 2.3 Suspend evaporator holder -3-  at the side.
      G15875278Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Evaporator holder

  3. Remove coolant hoses -3-4-  .
    1. 3.1 Loosen spring band clamps -1-2-  using > VAS 6930 - spring band clamp pliers  and pull them off the adapter on the circulating pump.
    2. 3.2 Disconnect coolant hoses -3-4-  and close them off using stoppers.
    3. 3.3 Set coolant hoses -3-4-  aside.
      G15875279Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Coolant hoses on circulating pump

  4. Remove circulating pump -4-  .
    1. 4.1 Release and disconnect electric plug connection -1-  .
    2. 4.2 Unscrew screw on circulating pump holder -2-  , open the holder -3-  and remove circulating pump -4-  .
      G15875280Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Electric plug connection and circulating pump holder

scientia non olet · About LEMON Manuals