Installing Heat Shield For Turbocharger
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Install heat shield for turbocharger -3-
.
- 1.1 Move heat shield -3- into installation position.
- 1.2 Fit and tighten nuts -1 and 2-
.
Nuts on heat shield, front -1- : > Tightening torque 5 Nm (3.7 ftlb.)
Nuts on heat shield, rear -2- : > Tightening torque 9 Nm (6.6 ftlb.)
- 1.3 Clip lines for the oxygen sensors -4 and 5-
into the clips -6-
on the heat shield.
Heat shield on turbocharger