Measuring Cylinder Bore
- Using the cylinder gauge VAS 6078,
take measurements as shown > Diagram for measuring cylinder bore
at three points in the cylinder, crosswise in transverse direction A
and in longitudinal direction B
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Diagram for measuring cylinder bore
| 1 |
20-mm cylinder bore depth |
| 2 |
60-mm cylinder bore depth |
| 3 |
105-mm cylinder bore depth |
| Cylinder bore |
New in mm |
Maximum permitted deviation from nominal measurement in mm |
Note |
| Nominal measurement |
86.01 ± 0.005 |
Not determined |
Measure at 20/60/105-mm cylinder bore depth. |