LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Turbo >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> 17 - Engine - Lubrication 4.0L Turbo Gas -- 971 - PANAMERA (971) >> WM, 170519 Removing And Installing Oil Pressure Switch (V8 BITURBO) >> Installing Oil Pressure Switch

Installing Oil Pressure Switch

  1. Installation is performed in reverse order.
  2. Replace sealing ring.
  3. Screw in and tighten oil pressure switch > Tightening torque 20 Nm (15 ftlb.) 
  4. Screw in and tighten screws in heat shield > Tightening torque 9 Nm (6.5 ftlb.) 
scientia non olet · About LEMON Manuals