Technical Values

Location	Des...	Type	Basic val.
EPB actuator to wheel bearing housing	Arrow: depending on type -Counters unk screw, M8 x 38 or internal serration screw, M10x 40/always replace screws following removal!	Initial tightening	20 Nm (15 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Mounting for actuator
EPB actuator to wheel bearing housing	Arrows: depending on type-Counters unk screw, M8 x 38 or internal serration screw, M10x 40/always replace screws following removal!	Final tightening	+ 60°
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Mounting for actuator