| Screw securing double clutch transmission to engine |
M12 x 100 x 30/replace |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| Screw securing double clutch transmission to engine |
M12 x 100 x 30/replace |
Torque angle |
60° |
|
|
| Screw securing double clutch transmission to engine |
M10 x 95/replace |
Initial tightening |
15 Nm (11 ftlb.) |
|
|
| Screw securing double clutch transmission to engine |
M10 x 95/replace |
Torque angle |
105° |
|
|
| Screw for connection point for ATF lines/transmission |
M8 x 20 |
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| Screw for ATF lines/transmission |
M6 x 12 |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| Fastening nut securing B+ line to generator |
M8 |
Tightening torque |
20 Nm (15 ftlb.) |
|
|