Overview Of Adapters - Panamera

Information 

• If you do not have a suitable adapter for the expansion valve, you can also drill out the removed expansion valve (the old expansion valve must be replaced in most cases and is therefore no longer required). 
• The control element must be removed before drilling. The expansion valve must then be drilled using a suitable drill bit, for example. (Drill bit diameter: 6.0 mm for example). 
• Some parts may have to be removed from the expansion valve before drilling, depending on the type of expansion valve. 

Tightening torques for the adapters are identical to the tightening torques used for the original components.

> 8X00IN TECHNICAL VALUES - AIR CONDITIONING