LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (47 Brakes - Brake Hydraulic System, Regulator, Booster 2.9L Turbo Gas -- 971 - PANAMERA (971)) >> WM, 471519 Removing And Installing Brake Master Cylinder >> Installing Brake Master Cylinder

Installing Brake Master Cylinder

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten nuts on the brake master cylinder. >Tightening torque 23 Nm (16.75 ftlb.) 

    Install new  sealing ring between the brake booster and brake master cylinder.

scientia non olet · About LEMON Manuals