Component Information
WARNING: This page is about a different variant/trim than selected.
PCCB brake discs consist of two parts on the front and rear axles. The brake disc -1- is screwed to the brake disc hub -2- with 10 screws -3- .
Only the complete PCCB brake disc (disc and brake disc hub) is available as a spare part!
Do not separate the brake disc hub -2- and brake disc -1- .
Do not loosen screws -3- . Screws are pressed into the bush to prevent them from turning.
Changing the torque of the screws -3- will have negative effects on the noise produced.
2-part PCCB brake disc