Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Mounting plate for wheel bearing to wheel bearing housing | Item 2: Hexagon-head bolt, M8 x 35/always replace bolts following removal! | Initial tightening | 20 Nm (15 ftlb.) | ||
|
Mounting plate on wheel bearing housing |
|||||
| Mounting plate for wheel bearing to wheel bearing housing | Item 2: Hexagon-head bolt, M8 x 35/always replace bolts following removal! | Final tightening | + 90° | ||
|
Mounting plate on wheel bearing housing |
|||||
| Heating wheel bearing housing | Before pressing in wheel bearing | Temperature | 80°C | ||