Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front-axle support (front section) to front-axle carrier | Hexagon-head bolt, M10 x 40 | Tightening torque | 55 Nm (41 ftlb.) | ||
| Front-axle support (front section) to front-axle carrier | Hexagon-head bolt, M8 x 30 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Front-axle support (rear section) to front-axle carrier | Multiple-tooth screw, M8 x 30 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Screws for decoupling elements/front-axle support | M5 x 8 | Tightening torque | 6 Nm (4.5 ftlb.) | ||
| Screws for holder for ATF lines or heat exchanger/front-axle support | M6 x 20 | Tightening torque | 8 Nm (6 ftlb.) |