Subsequent Work
WARNING: This page is about a different variant/trim than selected.
- Remove engine safety device.
> 1001IN SUPPORTING ENGINE ON THE BODY (ENGINE SAFETY DEVICE)
- Only for vehicles with all-wheel drive: Install spring struts with drive shafts
- Install front-axle support.
- Install wheel housing liner on both sides of the vehicle.
> WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER
- Install front wheels.
- Only for vehicles with PDCC: Start the 48 V vehicle electrical system.
- Fill up the ATF.
- Perform suspension alignment.