Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Install rear axle housing.
> 420519 REMOVING AND INSTALLING REAR AXLE HOUSING
Install final drive.
> 390119 REMOVING AND INSTALLING FINAL DRIVE
Tighten axle nut -1- on both sides of the vehicle. Operate the brake while doing this (2nd mechanic required) > Tightening torque 460 Nm (340 ftlb.)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Axle nut (front axle shown)
Perform suspension alignment.
> 449503 PERFORMING FRONT AND REAR SUSPENSION ALIGNMENT