Installing Right Recirculating Air Valve
WARNING: This page is about a different variant/trim than selected.
- Install right recirculating air valve -1-
.
- 1.1 Insert recirculating air valve -1-
.
- 1.1.1 Check that the heat shield -4- is seated correctly.
- 1.2 Fit new screws -3- .
- 1.3 Fit and tighten screws -3-
.
> Tightening torque 9 Nm (6.5 ftlb.)
- 1.4 Connect and lock electric plug connection -2- .
Recirculating air valve, right
- 1.1 Insert recirculating air valve -1-
.
- Connect vent line -1- to the oil separator -2- until it locks with an audible click.
Vent line