Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Nut on chiller holder | M5 | Tightening torque | 6 Nm (4.5 ftlb.) | ||
| Screws on chiller holder | M6 | Tightening torque | 8 Nm (6 ftlb.) | ||
| Screw for additional coolant pump for low-temperature system (P1) | Tightening torque | 8 Nm (6 ftlb.) | |||
| Screw for additional coolant pump for low-temperature system (P2) | Tightening torque | 8 Nm (6 ftlb.) |