Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw for belt tensioner (generator) | M8 x 25 (2 ea.)/replace | Initial tightening | 8 Nm (6 ftlb.) | ||
| Screw for belt tensioner (generator) | M8 x 25 (2 ea.)/replace | Final tightening | + 45° | ||
| Fastening screw for belt tensioner (generator), top | M8 x 60 | Tightening torque | 32 Nm (24 ftlb.) | ||
| Fastening screw for belt tensioner (generator), bottom | M8 x 33 | Tightening torque | 32 Nm (24 ftlb.) |