Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw for fuel tank | M8 x 30 (3 ea.) | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screw for fuel tank restraining strap | M8 x 30 (4 ea.) | Tightening torque | 20 Nm (15 ftlb.) | ||
| Screws for filler neck holder | M6 x 20 (3 ea.), observe specified tightening sequence | Tightening torque | 8 Nm (6 ftlb.) | ||
| Screw for filler neck protector | M6 x 20 (3 ea.), observe specified tightening sequence | Tightening torque | 8 Nm (6 ftlb.) |