Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Screw, torque support | replace | Initial tightening | 50 Nm (36.9 ftlb.) | ||
| Screw, torque support | torque angle | + 90° | |||
| Side strut to body | Hexagon-head bolt, M8 x 45/always replace bolts following removal | Initial tightening | 20 Nm (15 ftlb.) | ||
| Side strut to body | Hexagon-head bolt, M8 x 45/always replace bolts following removal | Final tightening | + 90° |