Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Des... |
Type |
Basic val... |
Toleranc... |
Toleranc... |
| Fastening screw for torque support bracket |
M8 x 55/(V6 Turbo M8 x 45) |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Coolant line mounting to engine, M6 |
M6 |
Tightening torque |
9 Nm (6.6 ftlb.) |
|
|