LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (40 Wheel Suspension Front Drive Shaft 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 407719 Removing And Installing Front Anti-Roll Bar (PDCC) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
*Location *Description *Type *Basic value *Tolerance 1 *Tolerance 2
Anti-roll bar to connecting link (PDCC) Item 3: Hexagon-head bolt, M12 x 1.5 x 60 and hexagon nut/always replace bolts and nuts following removal! Initial tightening 70 Nm (52 ftlb.)
G15860413Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar
Anti-roll bar to connecting link (PDCC) Item 3: Hexagon-head bolt, M12 x 1.5 x 60 and hexagon nut/always replace bolts and nuts following removal! Final tightening + 90°
G15860414Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Mounting for connecting link for anti-roll bar
Anti-roll bar clamps to anti-roll bar mount Item 2: Hexagon-head bolt, M10 x 32/always replace bolts following removal! Initial tightening 50 Nm (37 ftlb.)
G15860415Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount
Anti-roll bar clamps to anti-roll bar mount Item 2: Hexagon-head bolt, M10 x 32/always replace bolts following removal! Final tightening + 30°
G15860416Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Anti-roll bar mount
Ground line to front PDCC (EAWS) control unit Item 1: Internal hexagon roundhead bolt, M5 Tightening torque 5.6 Nm (4 ftlb.)
G15860417Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Disconnecting ground lines