LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (40 Wheel Suspension Front Drive Shaft 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 400819 Removing And Installing Front-Axle Support >> Removing And Installing Front-Axle Support (Rear Section) >> Installing Front-Axle Support (Rear Section)

Installing Front-Axle Support (Rear Section)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Make sure that the electric lines for steering and PDCC -1-  are routed through the openings > Correct position of the lines  . The electric lines can be pressed together slightly by screwing the front-axle support (rear section).

G15860263Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Correct position of the lines

  1. Tighten screws -2 and 3-  .

-2-  : > Tightening torque 30 Nm (22 ftlb.) 

-3-  : > Tightening torque 30 Nm (22 ftlb.) 

G15860264Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Front-axle support (rear section)