Technical Values

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

*Location	*Description	*Type	*Basic value	*Tolerance 1
Fastening screws securing high-voltage line to power electronics	-2-	Tightening torque	8 Nm (6 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. High-voltage line from power electronics to high-voltage battery at power electronics
Fastening screw for ground line for power electronics, top	Item 3	Tightening torque	20 Nm (15 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line for power electronics, top
Fastening nut for positive cable for power electronics, bottom	Item 3	Tightening torque	20 Nm (15 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Ground line for power electronics, bottom
Front axle carrier to body front	M12 x 1.5 x 90 thread/always replace bolts following removal.	Initial tightening	70 Nm (51.6 ftlb.)
Front axle carrier to body front	M12 x 1.5 x 90 thread/always replace bolts following removal.	Final tightening	+ 180°
Front axle carrier to rear body	Hexagon-head bolt, M10 x 45	Tightening torque	50 Nm (36.9 ftlb.)
Mounting anti-roll bar to body	M12 x 1.5 x 90 thread/always replace bolts following removal.	Initial tightening	70 Nm (51.6 ftlb.)
Mounting anti-roll bar to body	M12 x 1.5 x 90 thread/always replace bolts following removal.	Final tightening	+ 180°
Strut with mounting anti-roll bar to body	M12 x 1.5 x 90 thread/always replace bolts following removal.	Initial tightening	70 Nm (51.6 ftlb.)
Strut with mounting anti-roll bar to body	M12 x 1.5 x 90 thread/always replace bolts following removal.	Final tightening	+ 180°
Strut to body	Hexagon-head bolt, M10 x 25/always replace bolts following removal.	Initial tightening	50 Nm (36.9 ftlb.)
Strut to body	Hexagon-head bolt, M10 x 25/always replace bolts following removal.	Final tightening	+ 45°
Steering column centre to power-steering gear (universal joint)	Hexagon roundhead bolt, M8 x 30/always replace bolt following removal!	Initial tightening	20 Nm (15 ftlb.)
Steering column centre to power-steering gear (universal joint)	Hexagon roundhead bolt, M8 x 30/always replace bolt following removal!	Final tightening torque angle	+ 90°
Ground line to front PDCC (EAWS) control unit	Item 1: Internal hexagon roundhead bolt, M5	Tightening torque	5.6 Nm (4 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Disconnecting ground lines
Fastening screws securing engine mount to bracket	M10 x 45	Tightening torque	55 Nm (41 ftlb.)
Fastening screw securing engine mount to front axle	M12 x 60 x 1.5	Initial tightening	70 Nm (52 ftlb.)
Fastening screw securing engine mount to front axle	M12 x 60 x 1.5	Final tightening	+ 90°
Screw-type clamp for pressure hose		Tightening torque	5.5 Nm (4 ftlb.)	+/- 0.5 Nm (0.3 ftlb.)