Removing Temperature Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

Micro-self-locking screws

Fit new screws following removal.

Only for V6 Hybrid and V8 S Hybrid:

Unscrew screws on heat shield of temperature sensor and remove heat shield.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat shield
Release and disconnect electric plug connection.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connection
Unscrew outer temperature sensor holder and remove holder.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for outer temperature sensor
Carefully push the temperature sensor guide out of the transmission using a suitable tool.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Guide for temperature sensor
Unscrew screw on inner temperature sensor holder.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner temperature sensor holder
Remove the temperature sensor from the transmission and drive it through the side opening on the transmission.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Temperature sensor