Removing Evaporator/Condenser Line
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refrigerant
- Danger of freezing
→ Avoid contact with refrigerant.
→ Wear personal protective gear.
→ Observe the safety regulations for working on air-conditioned vehicles and handling refrigerant.
→ Observe the safety regulations for extraction and filling systems.
→ Observe the instructions for repairing air-conditioning systems and storing spare parts.
Information
Seal open lines and hoses with suitable plugs from the > VAS 6122 - engine sealing plug set .
- Remove refrigerant line at the condenser.
Pulling evaporator/condenser line out of condenser
- 1.1 Unscrew screw -1- on the condenser.
- 1.2 Pull refrigerant line out of the condenser.
- Loosen holder -2-
.
Loosen holder
- Release electric plug connection -1-a-
and disconnect it -B-
.
Release electric plug connection and disconnect it
- Remove refrigerant line for condenser -4-
.
Unscrewing screw at connection point for refrigerant line for condenser
- 4.1 Unscrew screw -3- at connection point for refrigerant line (internal heat exchanger) to the condenser.
- 4.2 Remove refrigerant line for condenser -4- .
- Unscrew screw -5-
at connection point for refrigerant line (internal heat exchanger) to the air-conditioning compressor.
Unscrewing screw at connection point for refrigerant line for compressor
- Unscrew screws -7-
for refrigerant line from evaporator to condenser (internal heat exchanger) -8-
at the expansion valve.
Unscrewing screws on expansion valve
- Pull grommet -6-
out of the cross panel.
Pulling out grommet
- Remove refrigerant line for evaporator.