Compressor Run-In After Installing A New Air-Conditioning Compressor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information

The prerequisites for compressor run-in can be found in PIWIS Tester directly under the Teach compressor function in the air-conditioning control unit.
Specifications in PIWIS Tester have priority and take precedence over the specifications in the description.

> 9900 - PIWIS Tester 3 must be connected to the vehicle before starting it. Switch on ignition.
Select the required vehicle type.
Select the Thermal management control unit in the overview . Press F12 to continue
Maintenance/repairs must now be selected.
Teach air-conditioning compressor must be selected. Press F8 to start.
Read out fault memory and erase it if necessary.
Switch off ignition. Disconnect the Tester from the vehicle.