Removing Servo Motor For Front Right Temperature Mixing Flap

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew screw -1- and remove holder -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bracket
Remove air-conditioning lines -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Air-conditioning lines
1. 2.1 Unclip sensor holder -1- .
2. 2.2 Loosen clamps -2- .
3. 2.3 Remove air-conditioning lines -3- .
Unscrew screws -1- and unclip cover -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cover
Unclip and pull off hose -1- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Hose
Unscrew screws -1- and unclip sound box -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Sound box
Remove servo motor for front right temperature mixing flap -3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Servo motor for front right temperature mixing flap
1. 6.1 Release and unplug electric plug connection -1- .
2. 6.2 Unscrew and remove screws -2- .
3. 6.3 Remove servo motor for front right temperature mixing flap -3- .