Installing Servo Motor For Front Right Temperature Mixing Flap
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order. Pay particular attention to the following:
Screw in and tighten screws securing servo motor for right front temperature mixing flap to air conditioner > Tightening torque 1.5 Nm (1 ftlb.)
Screw in and tighten screws securing sound box to air conditioner > Tightening torque 1.5 Nm (1 ftlb.)
Screw in and tighten screws securing cover to air conditioner > Tightening torque 1.5 Nm (1 ftlb.)
Tighten clamps for coolant lines > Tightening torque 6 Nm (4.5 ftlb.)
Screw in and tighten screws securing holder for coolant lines to air conditioner > Tightening torque 1.5 Nm (1 ftlb.)