Preparing Window Aperture For Installation
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Information
- The surface coating of adhesive residue helps new adhesive to stick. Keep cut surfaces clean and free of grease and do not clean with cleaning solution.
- When removing adhesive residue with a cutter -C-
and flashing knife -D-
on the body, ensure that a surface coating of adhesive remains.
Removing adhesive residue on rear lid
Information
- A drying time of 10 minutes must be observed between cleaning the bonding surface and applying primer! Remove all cleaning solution residue on the body.
- Clean new paint surfaces or damage to the top coat paint in the non-visible area of the window aperture in the body with cleaning solution -H1- and touch up with primer -H2- .
Cleaning and touching up paint surfaces and damaged areas