LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (64 Glazing, Window Operation - Wagon -- 971 - PANAMERA (971)) >> WM, 647519 Removing And Installing Rear Side Window Pane >> Installing Rear Side Window Pane

Installing Rear Side Window Pane

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the body in the front sealing lip area using isopropyl.
  2. Insert the rear side window pane into the window aperture.
  3. Set a uniform gap dimension by moving the side window.
  4. Screw in and tighten nuts -5-  > Tightening torque 8 Nm (6 ftlb.) 
    G15866125Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tighten nuts

  5. Clip in trim frame -4-  .
    G15866126Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Clipping in trim frame

  6. Affix sealing lip.
    G15866127Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding

    1. 6.1 Pull off protective film -1-  on the back of the sealing lip -2-  .
    2. 6.2 Press sealing lip -2-  on evenly from the bottom up.
scientia non olet · About LEMON Manuals