Installing Front Window Guide
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Installation is performed in reverse order to removal.
- Tighten fastening screw on inside of front window guide to > Tightening torque 2.5 Nm (2 ftlb.) .
- Tighten fastening screws on outside of front window guide to > Tightening torque 2.5 Nm (2 ftlb.)
.
Information
The adhesive pad cannot be pulled off without damaging it and must always be replaced.
- Stick new adhesive pad on firmly.
- 4.1 Position adhesive pad so that the assembly opening is completely covered.
- 4.2 Press adhesive pad on firmly.