Removing Moulding For Rear Lid
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Installation position of moulding for rear lid
- Remove foam -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Foam
- Unscrew and remove screw -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Screw
- Remove rubber sleeve -1-
.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Rubber sleeve
- Unclip and remove rear lid moulding -1-
using a plastic wedge.
 Courtesy of PORSCHE CARS NORTH AMERICA, INC.
|
Rear lid moulding