LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (66 Exterior Equipment - Wagon -- 971 - PANAMERA (971)) >> WM, 66471930 Removing And Installing Moulding For Rear Lid >> Installing Moulding For Rear Lid >> Rear Lid Moulding

Rear Lid Moulding

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is performed in reverse order to removal.
  2. Tighten screw to > Tightening torque 4 Nm (3 ftlb.)  .
scientia non olet · About LEMON Manuals