LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (66 Exterior Equipment - Wagon -- 971 - PANAMERA (971)) >> WM, 664719 Removing And Installing Moulding For Rear Lid >> Removing Moulding For Rear Lid

Removing Moulding For Rear Lid

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove covers -4-  .
    G15866228Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing covers

    1. 1.1 Unscrew screws -2-  and remove expansion rivets -3-  .
    2. 1.2 Lift the rear lid up slightly and pull covers -4-  outwards and remove them. -arrow- 
  2. Remove middle cover.
    G15866229Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing middle cover

    1. 2.1 Remove expansion rivets -5-  .
    2. 2.2 Unscrew and remove screw -8-  .
    3. 2.3 Take off the middle cover -6-  .
  3. Pull clamp -7-  up and unclip moulding for rear lid -1-  .
G15866230Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing moulding for rear lid

scientia non olet · About LEMON Manuals