LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (66 Exterior Equipment - Wagon -- 971 - PANAMERA (971)) >> WM, 663119 Removing And Installing Door Entry Guard >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install rear wheel housing liner -2-  .
    G15866205Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing wheel housing liner

  2. Screw in and tighten screws -1-  > Tightening torque 2.5 Nm (1.8 ftlb.) 
    G15866206Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw in and tighten screw.

  3. Install wheel housing liner -2-  at the door entry guard.
    G15866207Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing wheel housing liner

  4. Screw in and tighten screw -1-  > Tightening torque 2.5 Nm (1.8 ftlb.) 
G15866208Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw in and tighten screw.