LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Collision*** 5X Body - General - Wagon -- 971 - PANAMERA (971)) >> 5X Body - General >> WM, 5X00IN22 Processing Body Foam Filler >> Processing Body Foam Filler >> Preparing Bonding Surfaces >> Cleaning

Preparing Bonding Surfaces: Cleaning

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Then, clean the bonding flange areas using a lint-free cloth soaked in isopropanol or acetone until there are no more residues on the cloth.

Leave cleaned surfaces to dry off for 15 minutes; the bonding surfaces must be completely dry.

scientia non olet · About LEMON Manuals