LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (46 Brakes - Brake Mechanism 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 468320 Removing And Installing Brake Shoes >> Removing Brake Shoes

Removing Brake Shoes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Preloaded or pressurized components 
  • Risk of injury (e.g. crushing or bruising) when removing and installing springs. 

    → Do not reach into the danger area.

    → Relieve the tension on components before starting work.

    → Secure components to prevent them from loosening suddenly.

    → Wear protective gloves and goggles.

    → Be very careful when working on the brake system.

  1. Loosen the adjustment device -2-  using a screwdriver.
    G15861080Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening adjustment device

  2. Remove compression springs -3-  .
    G15861081Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Compression and tension springs

  3. Remove lower tension spring -4-  (at the adjustment device).
    G15861082Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Compression and tension springs

  4. Remove adjustment device -2-  .
    G15861083Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening adjustment device

  5. Remove upper tension spring -4-  .
    G15861084Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Compression and tension springs

  6. Remove brake shoes.
  7. Secure actuator for EPB using a tie-wrap -arrow-  .
    G15861085Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Securing actuator for EPB