Technical Values - Plenum Panel, A-Strut

WARNING: This page is about a different car, the 2023 Porsche Panamera and 2022 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Location	Description	Type	Basic value	Tolerance
Screw securing upper part of plenum panel at the centre to A-strut	Item 1	Tightening torque	8 Nm (6 ftlb.)	+/- 15 %
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws for A-strut
Screw securing upper part of plenum panel at the side to centre plenum panel	Item 2	Tightening torque	4 Nm (3 ftlb.)	+/- 15 %
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screws for A-strut
Screw securing upper part of plenum panel at the side to spring strut mount	Item 7	Tightening torque	8 Nm (6 ftlb.)	+/- 15 %
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Screw securing side plenum panel to spring strut mount
Nut securing cross panel to firewall	Item 1	Tightening torque	3.5 Nm (2.5 ftlb.)	+/- 10 %
Courtesy of PORSCHE CARS NORTH AMERICA, INC. Nut securing cross panel to firewall