LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (42 Rear Wheel Suspension Drive Shaft 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 421119 Removing And Installing Trailing Arm >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the vehicle.

    > 4X00IN LIFTING THE VEHICLE

  2. Remove wheel.

    > 440519 Removing and installing wheel - information on  "REMOVING "

  3. Remove cover for centre underbody.

    > WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY

  4. Remove coil spring or release air from air spring.

    > Refer to the appropriate Service Information for Removing and installing coil spring

    > WM, 430117 BLEEDING AND FILLING THE LEVELLING SYSTEM

scientia non olet · About LEMON Manuals