LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (72 Seat Frames - Wagon -- 971 - PANAMERA (971)) >> WM, 726719 Removing And Installing Rear Backrest Mount >> Installing Load-Through Provision Mount >> Installing Rear Backrest Mount

Installing Rear Backrest Mount

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Replace nuts following removal.

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Screw in and tighten nut on rear backrest mount: > Tightening torque 50 Nm (37 ftlb.) +/- 5 Nm (3.5 ftlb.) 

scientia non olet · About LEMON Manuals