Disassembling Rear Backrest Frame
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
- Unscrew screw -1-
and remove holder -2-
.
Removing holder
- Remove threaded plate -3-
.
Removing threaded plate
- Unclip cover -4-
(-arrows-
) and remove it.
Unclipping cover
- Unscrew screws -5-
and remove clip -6-
.
Removing clip
Only for vehicles with load-through provision on rear left backrest frame:
- Unscrew bolt for load-through provision lock.
Only for vehicles with armrest on rear left backrest frame (without load-through provision):
- Unscrew screws -7-
and remove armrest holder -8-
.
Removing armrest holder