Camshaft Control
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft control
| 1 | Actuator for camshaft controller |
| 2 | Screw, M6 x 16 > Tightening torque 9 Nm (6.5 ftlb.) |
| 3 | Central screw for camshaft controller/replace O-ring > Initial tightening 27 Nm (20 ftlb.) > Final tightening + 30 Nm (22 ftlb.) > Final tightening + 35° |
| 4 | Actuator for outlet camshaft |
| 5 | Actuator for intake camshaft |
| 6 | Installation marking/depending on type --> See Workservice information! |
| 7 | Valve lift adjustment |
| 8 | Screws, M5 x 20 > Tightening torque 5 Nm (3.5 ftlb.) |
CAMSHAFT CONTROLLER CENTRAL SCREW TIGHTENING SEQUENCE (ITEM 3)
| Result: | Cylinder bank: | Camshaft: |
|---|---|---|
| 1. | Bank 2 | Outlet |
| 2. | Bank 2 | Intake |
| 3. | Bank 1 | Intake |
| 4. | Bank 1 | Outlet |