LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Removing The Cylinder Head Cover >> Remove The Cylinder Head Cover

Remove The Cylinder Head Cover

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

Information 

The > T40331 - camshaft clamp  must be fitted before removal and installation.

> WM, 158420 REMOVING AND INSTALLING CAMSHAFT ACTUATORS (INCLUDES SETTING TIMING) 

  1. Remove cylinder head cover -1-  .
    1. 1.1 Unscrew screws -2-  slowly and uniformly from the outside in.
    2. 1.2 Remove cylinder head cover -1-  and set it down on a clean surface.
G15823836Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cylinder head cover

scientia non olet · About LEMON Manuals