Technical Values
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Cylinder head to upper part of crankcase | BM 10 x 170 x 120/Step 1 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Cylinder head to upper part of crankcase | Step 2 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Cylinder head to upper part of crankcase | Step 3 | Torque angle | + 300° | ||
| Cylinder head to upper part of crankcase | Step 4 Loosen (by about 2 turns) | Torque angle | - 720° | ||
| Cylinder head to upper part of crankcase | Step 5 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Cylinder head to upper part of crankcase | Step 6 | Torque angle | 120° | ||
| Cylinder head to crankcase | M6 x 35 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Cylinder head to crankcase | M6 x 35 | Torque angle | 25° | ||
| Collar axle - guide rail on bank 1 | Tightening torque | 9 Nm (6.5 ftlb.) | |||
| Screws for chain tensioner | M6 x 20 (2 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws for guide rail on bank 2 | M6 x 16 (3 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Screws for chain tensioner | M6 x 20 (2 ea.) | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Maximum permissible distortion on cylinder head | Control value | 0.1 mm | |||
| Minimum dimension on cylinder head | Control value | 137.95 mm |