LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Panamera Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (15 Engine - Cylinder Head, Valve Drive 4.0L Turbo Hybrid -- 971 - PANAMERA (971)) >> WM, 157019 Removing And Installing Cylinder Head >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 Porsche Panamera, 2022 Porsche Panamera, 2021 Porsche Panamera, 2020 Porsche Panamera, and 2019 Porsche Panamera. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of objects or loads falling down 
  • Risk of squashing or crushing 

    → Secure components to prevent them from falling down.

NOTE: Dirt and contamination 
  • Risk of damage to units or components 

    → Protect components from dirt and contamination.

    → Clean or replace dirty components.

  1. Remove the engine.

    > 100119 REMOVING AND INSTALLING ENGINE

  2. Remove engine.

    > 100127 REMOVING AND MOUNTING ENGINE

  3. Secure engine on assembly support.

    > 100113 SECURING ENGINE ON ASSEMBLY SUPPORT (V8 BITURBO)

  4. On the relevant side: 
    1. 4.1 Remove the cylinder head cover.

      > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER (V8 BITURBO) 

    2. 4.2 Remove turbocharger.

      > 213019 REMOVING AND INSTALLING TURBOCHARGER (V8 BITURBO)

    3. 4.3 Remove exhaust manifold.

      > 261019 REMOVING AND INSTALLING EXHAUST MANIFOLD (V8 TURBO)

    4. 4.4 Remove intake-air distributor.

      > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR (V8 BITURBO)